WakeMAKERS Ballast Rocker Switch Body
- Cannot add the item to shopping cart. Please try refreshing your browser.
Use the same switch Supra, Moomba, Malibu, Mastercraft, Tige and many others install at the factory for your custom wakeboard ballast project. This OEM (Original Equipment Manufacturer) illuminated 3-way rocker switch has positions for fill, off and drain.
Illuminated with red LEDs indicators when filling or draining, this switch makes the perfect control for any new or existing ballast system, and looks like it came from the factory in the boat (in many cases it would have).
Available now are our custom made switch covers available for every ballast location in the boat. Add one or more with the correct label for your application to have a complete fully functional switch (the switch body does not include a cover, so you will need to buy one of the covers listed below for each switch body you purchase).
Compatible with nearly any wakeboard ballast pump, including two aerator pumps for filling and draining, or one reversible impeller pump for the ultimate in flexibility. Wiring diagram is included with each switch for easy hookup, and wiring components, including connectors, and wire are available separately (see recommended accessories).
Wiring Diagram Clarification
If you are using this switch for a reversible pump you have to make the jumpers to change polarity on the back side of the switch. I interpreted the dotted line in the diagram an internal connection, this is not the case. After a conversation with the wakemakers team and them directing me to a pre-wired switch connector I discovered this. Not hard to do and still makes a sweet set-up, just wish the diagram was clearly marked.
First one broke
The switch works great. However I had some wiring issues to figure out and I had to remove the connectors a few times. Use a needle nose pliers and be careful. I was not and broke off the metal tan connector and had to get a new one.
Buy these if you want your install to look professional
Just like the factory switches. Good quality.
Switch is great. Service is great.
I added a ballast system to my boat and made up a new switch bank with other misc switches which I bought elsewhere (stereo, hatch, shower). They all fit together well. To match the other switch rockers appearance I bought the rockers elsewhere (including the ballast switch rocker) and they all fit together well.
Easy as... Just popped old 2 way ACC spare out and in went these babies, click the cover on, wire up (with extra help from the WakeMaker team).
Awesome Ballast Switches!!
I am super pleased with the look & the quality of these switches, which to top things off was the best price on the net. I am notorious for shopping around to get the best price & Wakemakers has hit the nail on the head. I also got the covers for Left & Right Fill/Empty on the switches. I have to say the finish is even better than I thought is would be & the install was easy & looks like it was there from the factory. I will be making some more purchases soon to get the wake machine ready for the long awaited summer.
Great switch and easy to use. Really like how you can pop the rocker panel off and turn it around. I've used these switches on my last two boats.
The switches were the easiest to install on my build. Well at least it went the fastest. I did have some issues with the wiring diagram a on making the switches work a reversible pump. With a little thought I was able to figure them out. I have a suggestion on making the drawings a little easier to read.
NOTE: Thanks for the feedback, we'll get in touch with you to get your recommendations on how we can make the wiring diagram easier to read.
- WakeMAKERS.com Team
Great swap out piece, no issues
This piece came in quickly and it was straight forward swap out. Pull the old rocker out and plug the new one in. All I needed was a phillips screw driver, how much easier can it be. The rocker came with a bunch of instructions and diagrams for more advanced wiring if needed. Mine was plugging into a circuit breaker panel so there was no wiring required but I sure would have felt comfortable if I did have to wire it in.
Perfect replacement for Moomba!
I have a 2007 Moomba Outback V; this is a perfect pit and a perfect replacement for the OEM Gravity I/III switches! Same look, same fit, what more could you want!?
Good quality finish - looks exactly like OEM. Good instructions and very easy installation. Good product
Dropped into place with no trouble
Most of these switches are from the same manufacturer, just different numbers of posts. I needed to get a switch that could accomodate the additional posts for reversing the pump, I was able to snap off the Centurion Avalanche rocker from the old switch and snap onto the switch body. No fuss, no muss. Wiring was a cinch, just follow the instructions on the pump, and we were operational in about 20 minutes.