Thru Hull Fitting - Black
These black plastic thru hull fitting are the same perfect drain fitting with a dark look. This fitting includes the black nut as shown in the picture.
Suitable for use as a drain or vent fitting for above the waterline use, the extended length barb has plenty of surface area to create a leak proof connection to standard 3/4" ballast hose. Perfect for finishing your integrated ballast system, or for upgrading the look of your factory through hull fittings.
|Size A||Flange O.D. B||Neck Length C||Holesaw||Size|
|3/4"||1.6"||3.1"||1"||buy now »|
|1-1/8"||1.77"||3.4"||1-3/8"||buy now »|
Functional and acceptable quality for a budget system
I was already breaking the bank on my system so I opted for the inexpensive vent/drain thru hulls. Quality is decent and blends in nicely especially on a black boat.
There was a bit of a "burr" from the molding process on the barbed ends of all of these that restricted the internal diameter noticeably. Not sure what kind of affect that would have on the flow but I opted to ream it off. A step drill bit turned by hand took care of it pretty easily.