Eight.3 Ballast Pump 3000GPH
The littler of the two Eight.3 portable ballast pumps by Ronix is still about speed and claims the prize for the 2nd fastest pump available on the market. This pump only draws 14 amps and is designed for older ski boats produced before 2009 that do not have a 20 amp fuse on the auxiliary power outlet (cigarette lighter adapter).
This 3000 gallon per hour aerator pump is made to be dropped either over the side of the boat for filling or directly into your telescoping ballast bag for draining. If you have an older boat that may not have enough juice to power the larger ballast pump the 3000GPH version may be perfect for you. Not to be out done this pump also features a fire hose style flow that is facilitated by the industries largest 1-1/2" reinforced non-kinking hose.
Eight.3 ballast systems are not designed to be integrated and are for serious riders that do not have time to wait for ballast to fill and drain. When combined with an Eight.3 Telescoping 400, 800 or 1100 ballast bag you will have the fastest pump based ballast system on the lake. This pump is not compatible with any Fly High Quick Connect Fittings or the Straight Line link system and cannot be integrated into your boat.
WARNING: Ballast pumps do not float and need to be secured to a ballast bag before entering the water. An unsecured pump may end up at the bottom of the lake.
How Eight.3 works:
Using the Eight.3 3000 gph pump is easy. Filling and draining your 8.3 Telescope bags happens in a fraction of the time that you are used to.
Filling: To fill, simply connect the male fitting on the end of the hose to the quick fill port on the top of the bag. Don't worry too much about spilling water as there is a built in check valve to help eliminate water from coming out of the bag when over filled.
Draining: To drain the bag start by pulling the top cover away from the telescoping drain tube. Pull it out of the bag and extend it as high as possible. Once the tube is above the water line of the sac unzip the entry point and physically submerge your pump into the bag. Zip the drain port around the hose to minimize the risk of water spilling out as the bag is drained. After draining there might be a small amount of residual water left at the bottom of the bag. Remove the pump and lift the bag over the side of the boat to release any liquid that may remain.