WakeMAKERS Engine Divider Panel Savers

Rated 4.9 out of 5
Based on 38 reviews
Write a Review
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
WakeMAKERS Engine Divider Panel Savers
Regular price
$99.99
PREORDER - Expected in 2-3 weeks

Order today to reserve yours obligation free, or sign up to get a notification when it's available.

Item: M10051

Designed to strengthen the engine divider panels on v-drive boats to prevent bowing when additional ballast has been added to the rear lockers. Sold as a pair.

One of the most popular WakeMAKERS products for several years now, our exclusive Engine Divider Panel Savers are a robust, easy to install solution to reinforce your engine divider panels. Add additional ballast to your rear lockers to achieve that great wake and don't worry about bowing of the engine divider panels due to the ballast bag bulging.

Each Engine Divider Panel Saver Kit now comes with a total of six bars, three for each of your two engine divider panels. Just order a quantity of 1 of this product, and you'll have everything you need for the whole boat.

The bar struts included in this kit are 19" long, making for a perfect fit on nearly any engine divider panel. Simply position the reinforcement bars on your panel, drill the required holes, and use the supplied allen key and hardware to securely fasten them in place. In just a few minutes you've prevented your divider panels from bending, bowing, or popping out of the track. No matter how much your ballast bag bulges in the rear locker, you can relax knowing that your engine divider panels are strong enough to withstand it.

Like all WakeMAKERS products, these are designed and built at our headquarters in Bend, Oregon. Built from thick sidewall 6063 Aluminum U channel and all hardware is stainless steel. After being precision cut, finished with radius edges, and drilled for a perfect fit, the bar struts are powder coated flat black for corrosion resistance and a factory appearance. Once installed they are practically invisible and look so good that most people will assume the boat came with them from the factory.

Our Engine Divider Panel Savers are now sold as a complete solution for both sides of the engine panels.

Estimated Install Time: 30 minutes

Required Tools: Drill with 3/8" drill bit

What's Included:

  • 6x 19" long 6063 Aluminum Machined U Channel Struts
  • 5/16-18 x 1" 304 Stainless Steel
  • 3/16" Hex Head Allen Wrench
WakeMAKERS Expert Insight

Expert Insight: Use Provided Tools

During installation we advise against using power drills to installs the bars as it causes the hardware to seize. Instead, hand tighten the hardware using the provided allen key.

Warranty
1 Year
Manufacturer Part Number
M10051
Item#
M10051
Warning
average rating 4.9 out of 5
Based on 38 reviews
  • 5 Stars
    34 Reviews
  • 4 Stars
    3 Reviews
  • 3 Stars
    1 Review
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
97% of reviewers would recommend this product to a friend
38 Reviews
Reviewed by Chris M.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Saved my panels.

Great product

Loading...
Was this helpful?

WakeMAKERS

Thank you for the review! We are so glad this worked for exactly what you needed.
Have a great rest of your summer!

Reviewed by Michael D.
Verified Buyer
Rated 3 out of 5
Review posted

Disappointed

This product is very well designed and made, and easy to install, but unfortunately it did not prevent the engine panels on my 2022 Moomba Mojo from collapsing with full (factory) ballast. Each side of the engine is in 3 panels on my Moomba and the largest panel on each side still gave into the weight of the ballast bags. I think I may need additional supports on the center panels. Overall I’m disappointed that this could not correct the issue on my boat.

Loading...
Was this helpful?
Reviewed by John K.
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

Panel Divider supports

they were a good fit and will do the job nicely. One problem is stainless steel bolts and nuts. they tend to gaul and you can not tighten or loosen them after that. I had one bolt that did that; so I drilled another hole next to it and got a new bolt to fit there. I recommend using some WD40 or other lubricant when installing these bolts.

Loading...
Was this helpful?

WakeMAKERS

Thanks for the feedback on this John, our engineers are looking into this to make sure we address any issues with galling or seizing.

Reviewed by Mike
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

needed two kits

The instructions say one kit (6 peices) to support two divider panels. However, the 2007 SV211 has a split divider panel design. The soft aluminum easily bent under pressure from the wakemakers piggy back ballast. I have redone the installation using two kits (6 reenforcing bars on each side). I'm keeping my fingers crossed they do not bend this time. If so, I'll try to source a stronger material, like stainless steel. Nice idea but it needs to maintain it's shape to do it's job.

Loading...
Was this helpful?
Reviewed by Logan D.
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

Short bolts

I would give 5 starts except that the 1" bolts were too short to install on my divider panels. Overall great product.

Loading...
Was this helpful?

WARNING

This product can expose you to chemicals including DINP (Diisononyl phthalate) and DIDP (Diisodecyl phthalate) which are known to the State of California to cause cancer. For more information go to https://www.p65warnings.ca.gov.

Best Price Promise

We want you to receive the best possible deal on your boating products. We match any authorized dealer's advertised price for the same in-stock item. What does that mean for you? If you find the same product in stock at another authorized retailer we'll gladly match their price delivered price. Don't forget that on top of our free fast shipping (on any order over $99 shipped to the Continental US) we also offer our exclusive lifetime technical support.

  • WakeMAKERS Best Price Promise is only valid on products sold by factory authorized internet dealers.
  • WakeMAKERS Best Price Promise is not available with any coupons or individual discounts.
  • WakeMAKERS Best Price Promise is based on the delivered price for the item and will factor in shipping and tax charges.
  • WakeMAKERS Best Price Promise is only available on an exact, in stock product with a displayed internet price (not price implied after promotions and coupons)
  • WakeMAKERS Best Price Promise is not available to be applied retroactively, so please contact us us BEFORE placing your order.

If you have any questions about our price match policy, or if you would like us to match a price for you, simply contact us.

Note We have the right to refuse price matching at any time for any reason. In order to qualify for price matching, the item must be identical make, model, year, and part number, and must be in stock. Price matching excludes sale items and previously purchased products.

365 Day Returns

365 Day Returns Your satisfaction is our biggest priority, which is why we gladly accept returns on any new product for up to 365 days from the date your order ships. Refunds will be issued to the original payment method for up to 30 days from the original ship date. Returns on orders older than 30 days up to 365 days will be processed as store credit that can be applied to a future order.

For the full details of our 365 Return Policy, including any restrictions or exclusions, please visit the Returns & Exchanges section on Customer Service page.

Expert Advice

Our product experts bring over 40+ years of real-world experience and knowledge of the boating industry. They really know the gear, because they spend their free time out on the water with friends and family testing the products out.

Product Expert Phone Hours 9am - 5pm (PST) Monday - Friday

Product Expert Email We respond to most emails within 24-48 hours.

Looking for specific installation guides or instructional videos? Check out our Resource Section for detailed information.

WakeMAKERS Online Shopping Tools Our Finder tools are designed to help you pick the perfect product. We've simplified the complex process of finding the right ballast or prop for you boating style and made it easy by doing the research for you.

Our goal is simple; provide the best product, at the best price, with the best customer support.

Free Shipping On Orders Over $99

The last thing you want to do is pay to have your order shipped when shopping online, which is why we include free shipping on all orders over $99*.

*Free shipping offer applies to orders over $99 shipped within the Continental United States and cannot be combined with other discounts or promotions (including coupon codes).