Designed to strengthen the engine divider panels on v-drive boats to prevent bowing when additional ballast has been added to the rear lockers. Sold as a pair.
One of the most popular WakeMAKERS products for several years now, our exclusive Engine Divider Panel Savers are a robust, easy to install solution to reinforce your engine divider panels. Add additional ballast to your rear lockers to achieve that great wake and don't worry about bowing of the engine divider panels due to the ballast bag bulging.
Each Engine Divider Panel Saver Kit now comes with a total of six bars, three for each of your two engine divider panels. Just order a quantity of 1 of this product, and you'll have everything you need for the whole boat.
The bar struts included in this kit are 19" long, making for a perfect fit on nearly any engine divider panel. Simply position the reinforcement bars on your panel, drill the required holes, and use the supplied allen key and hardware to securely fasten them in place. In just a few minutes you've prevented your divider panels from bending, bowing, or popping out of the track. No matter how much your ballast bag bulges in the rear locker, you can relax knowing that your engine divider panels are strong enough to withstand it.
Like all WakeMAKERS products, these are designed and built at our headquarters in Bend, Oregon. Built from thick sidewall 6063 Aluminum U channel and all hardware is stainless steel. After being precision cut, finished with radius edges, and drilled for a perfect fit, the bar struts are powder coated flat black for corrosion resistance and a factory appearance. Once installed they are practically invisible and look so good that most people will assume the boat came with them from the factory.
Our Engine Divider Panel Savers are now sold as a complete solution for both sides of the engine panels.
Estimated Install Time: 30 minutes
Required Tools: Drill with 3/8" drill bit
What's Included:
6x 19" long 6063 Aluminum Machined U Channel Struts
5/16-18 x 1" 304 Stainless Steel
3/16" Hex Head Allen Wrench
Expert Insight: Use Provided Tools
During installation we advise against using power drills to installs the bars as it causes the hardware to seize. Instead, hand tighten the hardware using the provided allen key.
95%
of reviewers would recommend this product to a friend
Customer photos and videos
41 Reviews
DD
Derek D.Reviewed by Derek D.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted
Good quality support upgrade for dividers
Installed these divider supports with the vent upgrade and bagbusters. Everything was high quality parts, fitment was perfect and install is pretty straight forward. Some of the nuts were tight to fit in the channel but that also helps hold it in place when tightening the u-channel to the divider. Everything installed and went together nicely. Took about 30 minutes to install the supports on both sides. Whole project with all 3 upgrades took under 2 hrs (probably could have been shorter but I am a perfectionist).
Loading...
Was this helpful?
DG
Dennis G.Reviewed by Dennis G.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted
Easy install
Easy install but, remember the bolts and nuts are stainless and you will need to use some type of Anti Seize on the threads
Loading...
Was this helpful?
WakeMAKERS
Thanks for the feedback, enjoy your new panel savers!
JN
Josh N.Reviewed by Josh N.
Verified Buyer
Rated 3 out of 5
Review posted
Nylon locking nuts are not good quality
I bought 2 sets to have 6 bars in each divider as some have suggested. I had 4 of the nylon locking bolts completely seize up. I was not using a drill. Only using the allen key provided. If your reading this guys I could use 4 more bolts and 4 more nuts.
Loading...
Was this helpful?
CM
Chris M.Reviewed by Chris M.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted
Saved my panels.
Great product
Loading...
Was this helpful?
WakeMAKERS
Thank you for the review! We are so glad this worked for exactly what you needed. Have a great rest of your summer!
MD
Michael D.Reviewed by Michael D.
Verified Buyer
Rated 3 out of 5
Review posted
Disappointed
This product is very well designed and made, and easy to install, but unfortunately it did not prevent the engine panels on my 2022 Moomba Mojo from collapsing with full (factory) ballast. Each side of the engine is in 3 panels on my Moomba and the largest panel on each side still gave into the weight of the ballast bags. I think I may need additional supports on the center panels. Overall I’m disappointed that this could not correct the issue on my boat.
Loading...
Was this helpful?
Share this product with others.
WARNING
This product can expose you to chemicals including DINP (Diisononyl phthalate) and DIDP (Diisodecyl phthalate)
which are known to the State of California to cause cancer. For more information go to
https://www.p65warnings.ca.gov.
Best Price Promise
We want you to receive the best possible deal on your boating products. We match any authorized dealer's
advertised price for the same in-stock item. What does that mean for you? If you find the same product in
stock at another authorized retailer we'll gladly match their price delivered price. Don't forget that on top
of our free fast shipping (on any order over $99 shipped to the Continental US) we also offer our exclusive
lifetime technical support.
WakeMAKERS Best Price Promise is only valid on products sold by factory authorized internet dealers.
WakeMAKERS Best Price Promise is not available with any coupons or individual discounts.
WakeMAKERS Best Price Promise is based on the delivered price for the item and will factor in shipping and
tax charges.
WakeMAKERS Best Price Promise is only available on an exact, in stock product with a displayed internet
price (not price implied after promotions and coupons)
WakeMAKERS Best Price Promise is not available to be applied retroactively, so please contact us us BEFORE
placing your order.
If you have any questions about our price match policy, or if you would like us to match a price for you,
simply contact us.
Note
We have the right to refuse price matching at any time for any reason. In order to qualify for price matching,
the item must be identical make, model, year, and part number, and must be in stock. Price matching excludes
sale items and previously purchased products.
365 Day Returns
365 Day Returns
Your satisfaction is our biggest priority, which is why we gladly accept returns on any new product for up to
365 days from the date your order ships. Refunds will be issued to the original payment method for up to 30
days from the original ship date. Returns on orders older than 30 days up to 365 days will be processed as
store credit that can be applied to a future order.
For the full details of our 365 Return Policy, including any restrictions or exclusions, please visit the
Returns & Exchanges section
on Customer Service page.
Expert Advice
Our product experts bring over 40+ years of real-world experience and knowledge of the boating industry. They
really know the gear, because they spend their free time out on the water with friends and family testing the
products out.
Product Expert EmailWe respond to most emails within 24-48 hours.
Looking for specific installation guides or instructional videos? Check out our
Resource Section for detailed information.
WakeMAKERS Online Shopping Tools
Our Finder tools are designed to help you pick the perfect product. We've simplified the complex process of
finding the right ballast or prop for you boating style and made it easy by doing the research for you.
Our goal is simple; provide the best product, at the best price, with the best customer support.
Free Shipping On Orders Over $99
The last thing you want to do is pay to have your order shipped when shopping online, which is why we include
free shipping on all orders over $99*.
*Free shipping offer applies to orders over $99 shipped within the Continental United States and cannot be
combined with other discounts or promotions (including coupon codes).
Choosing a selection results in a full page refresh.
