ACME 911 3 Blade 13" x 10.5" Propeller

ACME 911 3 Blade 13" x 10.5" Propeller



In stock Ships tomorrow

*Discount codes do not apply to this item.


Diameter 13"
Pitch 10.5"
Cup .080"
Shaft 1-1/8"" - Left
Manufacturer Acme Props - view brand page
Manufacturer Part # 911
Item # 63015


The Acme 911 3 Blade Propeller is ideal for direct drive boats that are weighted for surfing or wakeboarding but still need decent top end to pull skiers or cruise across the lake.


The ACME 911 3 Blade Propeller is nothing like 3 blade propellers of the past. Prior to 1999, wakeboard and ski boat propellers were cast from molds, a process that offered little precision and had severe limitations for the size and shape of the blades. The result was inefficient props with small blade surface area and poor balance which caused vibration in the boat drive line.

All this changed when ACME revolutionized the manufacturing process by implementing CNC machining. Precision machining of its wakeboard and waterski boat propellers allows ACME to hold tolerances and achieve accuracies never before seen in the propeller industry. Which results in larger surface area props that are more efficient and perfectly balanced for silky smooth operation.

What does that mean for you? The new ACME 3 blade propellers are now capable of providing you with the same holeshot and top end performance that many 4 blade propellers deliver. Whether you want to make your old ski boat feel like new or improve the performance of your new wakeboard boat, the ACME 911 3 Blade Propeller will get the job done.

Exclusive Prop Finder Tool

ACME CNC machining prop manufacturing process

Propeller Accessories

Write a Review and Enter to Win $50*

You must be logged in to submit product reviews. If you already have a customer account, log in.
Otherwise, you will need to Create an Account.

  • 7/18/2017
    Great for weighted boat - 2006 Sanger V230
    Erik Smith

    I had a 525 on my boat and it was a great prop for all around use. However, I have really weighted my boat down for wakesurfing and my lower end was struggling with the 525. I put the 911 on and it has so much more lower end torque and it holds low speeds much better. My only issue is high RPM's at higher speeds. I am looking at 3800 -4000 when going about 32 MPH. If I want higher end speed for skiing or barefooting, I will change back to 525. The 911 prop worked really well for what I want the boat to do...Wakesurf!

  • 8/17/2016
    Acme 911 -98 centurion
    Walter Chavez

    Like a granny gear compared to the OEM prop, easier to hold speed while towing with loaded down with ballast, didn't lose much on the top end compared to the gain on the low end. Easy upgrade!

  • 8/10/2015
    Pleasantly Surprised
    Todd Smith

    Was very skeptical about going from my OJ 4-blade to this 3-blade on my 1998 Tige PRE 2200 but followed the prop selection guide and trusted recommendation. I don't perceive any loss in pull out of the hole or at surf speed. Consistent pull at wakeboard speed and I gained about 6 - 8 mph at the top end. NICE!

  • 8/29/2014
    Two thumbs up!

    We put this on our Tige 22i at the recommendation of the Wakemakers staff, and we are glad we did! We use our boat for heavy pulling all summer (8 Man water sled etc.) and this prop was great. We know this because we hit a rock with it and had to go back to a 525 while waiting for a new 911 to ship and my driver noticed a huge decline in performance with that more moderate prop. So, great recommendation, great product, great price, great shipping - what's not to like?

  • 7/18/2014
    lower pitch pulls way harder

    No more full throttle when sacked out

  • 7/14/2014
    Amazing Prop!
    California David

    I'm new to boating and I shopped for a new prop based on price and suggestions from the internet. The ACME 911 prop replaced the stock prop on my Sanger V230 and WOW, what a difference! I'm not only able to pop right out of the water with this prop, but the whole boat sounds and feels different now. There is a huge difference in the low end torque and I can pop surfers out of the water like it was nothing. The torque is smooth and I can't really tell if I've lost anything off my top end like the reviews say. I don't take my RPMs much over 3500 and I have instant power all through the range. Wakemakers has the best price that I can find through Google shopping and the shipping was fast! I had my prop in 2 days just before the holiday and I was back in business.