ACME 1235 4 Blade 14.5" x 14.25" Propeller
The ACME 1235 4 Blade 14.5" x 14.25" Propeller offers more surface area than comparable 3 blade propellers which means a more efficient transmission of power, higher fuel economy, and more consistent speeds. Thanks to ACME’s continued devotion to push the ski and wakeboard boat propeller industry to new heights inboard props are helping ski and wakeboard boats achieve performances never before seen.
Prior to 1999, ski and wakeboard boat propellers were cast from molds, a process that offered little precision and had severe limitations for the size and shape of the blades. The result was inefficient props with small blade surface area and poor balance which caused vibration in the boat drive train. However, all that changed when ACME introduced CNC machining to the inboard propeller industry. By precision machining its waterski and wakeboard boat propellers ACME is now able to hold tolerances and achieve accuracies never before seen in the inboard propeller industry.
What does that mean for you? The ACME 1235 4 Blade Propeller will perform up to and surpass the standards you expect from the moment you pull it out of the box and put it on your boat.
Awesome Acme 1235
My 2007 Super Air Nautique performs so much better with the 1235!! The wake improved and the acceleration is outstanding!
Price and delivery was great!
I wish I had went ahead and ordered a new nut and cotter pin that's my only regret.
2007 VLX - Acme 1235 - we surf a lot and when loaded with weight and peeps, the boat would cavitate some and shake at times. Also noticed with loaded with water/people and wake boarding it would be sluggish. I replaced the old 537 and what a difference. The boat accelerates and planes with lots of weight effortlessly. You can tell the boat is working way less than before. Also believe I am saving gas too!!
Using a surf plate device, evenly weighting the boat, and wave is amazing now! It is like driving a new boat!!
Ordering and shipping a breeze as well. Really glad I bought the boat prop hardware kit too as key was damaged from old prop. Loving it!
Wake me up!
1998 sunsetter vlx. (previous prop acme 381) I did read in a previous review that this prop made a bigger wake, YUP!! It sure does, don't know how or why it would, but it did. Also keeps speed really well too. Gets on plane faster. Great buy!
Good golly mizz molly!!!!!
BEST upgrade i've done to my 2000 MC Xstar!!! I use it along with my sumo bags and ballast system that I bought in the winter from Wakemakers and man oh man is this thing awesome! Holds speed like perfect pass for surf and wakboards. Lower RPM's and better gas consumption. I just rebuilt my engine and the prop brought it to life. The old prop looked like a piece of fried bacon and it is just a world of differance. Pulling 2 boarders out with full ballast and boat full with a 4 sec plane time. No joke if you are hesitating because of the $$$; it is cheap insurance for the amount of wear a bad/wrong prop does on a engine
YESSSSSS!!!! Like driving a brand new boat!
Installed the new prop on my 1999 Malibu Sunsetter VLX. Bigger wake, more acceleration, best purchase...EVER!
Put this prop on my 2014 Tige Z3. It was drastically improved my towing capability! Shipping was fast, and order received exactly as described!
I bought this prop about a month ago for my 2007 Tige 22Ve. I loaded our boat with 4000 lbs and had 4 people on it. It was slightly sluggish and was using high revs. I has 1100 lbs in the center 1440 up front and 1200 in the rear lockers and 250 in lead. The wake was the biggest I have ever ridden, and we rode for about 2 and a half hours. When we used to ride for two and a half hours weighted down with 1500 and 4 people we would use a 1/4 tank of gas. With this new prop and that additional weight we used less than an 1/8 of a tank probably a little more than a 1/16 of a tank but I could not believe how much gas it saved. WELL WORTH the 550 I calculated it out and it will pay for itself in about 21 trips at 2 and a half hours of ride time.
Great prop at a great Price
Purchased a 1235 Acme for my 2007 waksetter with Hammerhead 383. Great performance for surfing and boarding. Great hole shoot with smooth acceleration. Best of all we had gas to spare. Never will miss my old 537 Acme. Speedy transaction at a great price from WakeMakers.. Thanks
Product Good - Service Awesome
Every interaction with the folks at Wakemakers has been very good. I tend to be loyal to companies who provide great service. You can tell very quickly, once you contact them, that they are working hard to differentiate themselves in this area. I was impressed. I have and will be back.
I put this prop on my 07 Malibu Wakesetter VLX 340 Monsoon and it is the best addition that I have put on my boat. Out of the hole the power difference is fantastic and the boat sounds and tracks better all round. I recommend this to any Malibu Wakesetter owners!!!
I put this prop on my 1995 Mastercraft Maristar to replace the OJ 14X18 stock prop. I was looking for more acceleration for wakeboarding and wakesurfing. Well this prop did exactly that. I was completely shocked at how this prop improved the acceleration. It's like a whole new boat. I highly recommend this prop.