You have no items in your shopping cart.
You're currently on:
This kit is designed for 2002-2008 Supra and Moomba wakeboard boats equipped with the Gravity III wakeboard ballast system from the factory. Determine the perfect weigh for your boat with the option to add between 750 and 1400 pound ballast. Because any upgraded bag will be taller than the factory bag, we include a prefabricated fill hose extension that will quick connect to the factory hose. The extension is made with the same hose and fittings as the factory connection to simplify the install.
Plug and Play Design
The secret to our BagBuster upgrade is the pre-fabricated extension hose that connects directly to the Flow-Rite Quick Connect Fitting currently in your boat. That means the entire installation is completely plug-and-play, takes less than two minutes, and requires no modifications to your boat.
Together with the Flow-Rite Quick connectors already installed in the new ballast bag you'll be ready to ride in a matter of minutes, and you can return everything to stock just as fast if you decide you want to sell the boat.
| Bag Size | Application |
|---|---|
| No Bag | Chose this option if you already have a Fly High Pro X Series ballast bag |
| 565 lbs | Suitable for use in all 2002-2008 Supra and Moomba v-drive boats |
| 750 lbs | Suitable for use in 2002-2008 Moomba Outback V, LSV and XLV boats and 2002-2008 Supra 20V, 21V, 22V and 24V boats. |
| 1,100lbs | Suitable for use in 2006+ Moomba LSV and XLV boats and 2002-2008 22V and 24V boats. |
Installation takes less than ten minutes from start to finish, and results in a factory quality installation with the additional weight you need to produce the best wake possible. The installation is accomplished by completing the following steps:
- Remove the factory ballast bag by releasing the red locking ring on the fill and drain connectors. Make note of which hose connects to the top of the bag and which hose connects to the bottom of the bag before removal.
- Insert the supplied fill hose extension into the end of the factory fill hose slide the red locking collar down to create water-tight connection.
- Place the new bag in the boat and reconnect the fill and drain hoses to the connectors, ensure the red locking ring is in the down position.
Absolutely no modifications are required, and the entire installation is completely reversible for resale value, or if you decide to reinstall your factory wakeboard ballast bags.
This upgrade is ideal for setting the boat up for surfing on one side, or both sides with two kits, and can also be used with additional weight in the bow of the boat to create a monster wakeboard wake.
-
Great product and so easy to do.
Review by walb0244 on 9/10/11Quality Price Value Great product. Purchased this bag to be able to create a bigger wave while surfing. The quality is great. I purchased the 1100 lb bags with this kit. Everything was right there in the kit and I had the bags installed in a matter of minutes. It took me longer to find something to cut the tape then it did to install the bag. Hahaha.
Write Your Own Review
We pay YOU $5 when you review products on our website. Just submit your review, and as soon as it's approved we'll send you a coupon code you can use to save $5 on the next purchase you make.
When writing your review please try to provide detail about the specific things you like and don't like about the product. Simply saying "this is a really cool product" or "this product sucks" doesn't offer much input, instead think about WHY you feel that way, and back it up with specific examples. That will make your review more useful for other shoppers, which is the whole point. All feedback is subject to verification, and reviews that are too short, obviously made up, or inappropriate will not be approved.

