Supra/Moomba BagBuster Rear Ballast Upgrade (2013+)
Quickly and easily upgrade the factory rear ballast bags in your 2013 or newer Supra or Moomba wakeboard boat with our ballast upgrade kit that includes a Fly High Pro X Series ballast bag and all of the necessary fittings.
This kit is designed specifically for 2013 or newer Supra and Moomba wakeboard boats equipped with the Gravity III wakeboard ballast system from the factory. Included is a new ballast bag with quick connects ready to be connected to the matching quick connect fittings on the ends of the factory hoses (we no longer glue the fittings into our bags).
Since the new larger capacity bag comes from the same company that supplies the factory, It doesn't get any more factory than this. The result is increased capacity that looks like it could have come from the factory.
|No Bag||Chose this option if you already have a Fly High Pro X Series ballast bag.|
|565 lbs||Suitable for use in all 2009+ Supra and Moomba v-drive boats|
|750 lbs||Suitable for use in 2009+ Moomba Outback V, LSV and XLV boats and 2009+ Supra 20V, 21V, 22V and 24V boats.|
|1,100lbs||Suitable for use in 2009+ Moomba LSV and XLV boats and 2009+ Supra 21V, 22V and 24V boats.|
Installation takes less than a minute from start to finish, and results in a factory quality installation with up to 1,100 pounds of total weight. The installation is accomplished by completing the following steps:
- Remove the factory ballast bag by releasing the red locking ring on the fill and drain connectors.
- Place the new bag in the boat and reconnect the fill and drain hoses to the connectors, ensure the red locking ring is in the down position.
This upgrade is ideal for setting the boat up for surfing on one side, or both sides with two kits, and can also be used with additional weight in the bow of the boat to create a monster wakeboard wake.
Came with the fittings needed. Great upgrade.
Great bang for your buck!
We threw the 1100 pound bags in our 15 Mojo and it gave us great results! They fit in the rear lockers well. They get a little squished under the rear seats but still fill almost all the way. I would recommend buying the engine divider supports With these bags! These are hefty! Great upgrade for the Mojo!
Very easy to install and provides substantial increase to wave size. Fills '14 Moomba LSV rear locker completely. Was originally concerned it would be too big based on dimensions but I am very happy with how well it fits.
Best kind of product-Simple and works
Want/need more weight for you boat then this is a no brainer. Bags fit great and all the included hardware made for a 5 min tool less install. More weight=more wave. Happy with my purchase and definitely recommend. Used in a 2014 Mojo 2.5
Simple, effective, no-brainer
Simple, effective, no-brainer
Just what the 2013 Moomba LSV needed
These bags are great and installing them couldn't be any easier.