Flow Rite 3/4" Elbow Quick Release Connector W742
- Cannot add the item to shopping cart. Please try refreshing your browser.
Make a secure, water-tight, yet quickly removable connection with the Fly High 3/4" Elbow Flow-Rite Quick Release Connector. The elbow quick release connector has a 3/4" hose barb fitting on one side and a 90 degree lockable female end on the other that will connect directly to the Fly High 3/4" Flow-Rite Quick Release Connect. Perfect for integrating Fly High ballast bags to factory ballast systems in Malibu, Air Nautique, or any other wakeboard boat.
For more information on the Flow-RIte Quick Connect fittings system, read our blog post: Fly High Flow-Rite Quick Connect System Explained.
Fly High ballast fittings have been designed with you in mind. All of the fittings make connecting pumps and hoses to your Fly High Pro X Series Ballast Sacs a quick and simple task. No more struggling with old waterbed valves and water spilling inside the boat. Simply twist, pull, replace and you're ready to go! Fly High offers several different fittings that all work together to adapt to any of your needs.
Easy on and off
QD's are easy on and off. Convenient for swapping bags. Hose went on connector for a perfect fit.
I needed a new PNP fitting for my factory PNP bag connection on my Axis A22. This was an exact match to all other fittings.
Quick connect fittings
I replaced my waterbed fittings with these and also the Fly-High sacs. Much better quality than the Skylon bags and fittings they replaced.
Great for plug and play systems. Simple to connect or disconnect bags. True to size and perfect fit.
Great part that comes in handy to remove sacks and clean / dry out your boat!
These release fittings make it easy to connect and disconnect ballast bags within seconds. The nice thing about all of the Fly High fittings is that they are made to fit other Fly High products. Instead of playing guess and check at a local hardware store, you know they will fit. Although simple, they fit perfectly and do the job. Mine have made it though two seasons already with plenty of wear and tear (I usually take my ballast bags out of the storage lockers regularly so the fittings have been tried several times).
Quick release fittings
The fly high quick release fittings are great and definitely a perfect addition when adding ballast bags. I searched all over the internet for different style fittings and nothing comes close to these fittings. They don't leak, they are super easy to connect and disconnect and they are pretty cheap. There is a little locking collar that slides down and keeps it on, when you want to remove it just slide the locking collar up and it slides right off, takes about 1 second. For me it is very important to be able to remove the bags. Removing them really should be done in the off season but I just like to disconnect them and roll them up when not in use so that I have empty storage areas. I will also disconnect the bag when I need to move them to the same side for surfing. For permanent ballast installs these are the fittings that you want to use.
Quick disconnects make it very easy to remove the bags. It is great in the off season when you want to take the bags out completely and drain them completely. Also if just makes removing the bag for whatever reason you may have a lot easier.