Centurion TankBuster Rear Factory Ballast Upgrade
- Cannot add the item to shopping cart. Please try refreshing your browser.
Centurion TankBuster Rear Factory Ballast Upgrade
Tired of the above floor factory hard tanks in your Centurion wakeboard boat taking up too much storage space and not offering enough ballast? Replace them with the WakeMAKERS TankBuster ballast system upgrade to create a massive wakesurfing or wakeboarding wake. Instantly triple the ballast capacity in each rear corner, while at the same time restoring full use of the lockers for storage when you don't need the biggest wake possible.
The most popular setup is to add an additional 750lbs. of ballast to your boat's factory ballast system. Select the bag that works the best for your application.
The WakeMAKERS TankBuster Wakesurf Ballast System is designed to integrate with your factory ballast system easily, be controlled using the switches on your dash, and not require any additional effort to fill and drain.
How It Works
The Centurion TankBuster Ballast System Upgrade takes the place of the existing factory hard tank installed in either the rear locker or in the mid ship of V-drive Centurion wakeboard boats. Once installed, the new 750lb. Fly High Pro X Series Fat Sac is controlled completely from the driver's seat, and uses the factory pumps and plumbing. Everything functions exactly the same as it did from the factory, but you've added an addition 500 pounds of wake building capacity. Additionally, when the bags are empty, the entire rear locker is usable space, dramatically increasing the amount of storage for gear and equipment. This kit includes everything needed for the installation, including a new ballast bag and the necessary Fly High quick connect fittings, adapters to connect to your boat's factory system, and step-by-step instructions.
Once installed, the three ports on the new Ballast Sac are connected to the fill, drain and vent hoses from the factory ballast system, making the Centurion TankBuster a direct replacement. For convenience, Fly High Quick Connect fittings are used allowing you to easily remove the bag for cleaning, storage or winterization. Triple the capacity, double the storage space, all controlled using the factory dash switches makes the TankBuster the perfect ballast upgrade for your Centurion wakeboard boat.
The installation process is incredibly simple, completely reversible, and only has to be done one time to use the TankBuster system. Removing the factory tank and installing the new TankBuster bag typically takes a couple of hours to do both sides of the boat, so plan on leaving yourself and afternoon for the project.
- Step 1: Locate and identify fill and vent hoses at the top of the factory ballast tank. The fill hose will come from down in the bilge of the boat, while the vent hose will go directly from the ballast tank to a fitting in the side of the boat.
- Step 2: Remove the drain pump from the factory hard tank by unthreading it.
- Step 3: Remove hose clamps securing the factory fill, vent and drain hoses to the hard tank located in the rear compartment.
- Step 4: Remove factory "L" brackets used to secure ballast tanks to the floor of the boat.
- Step 5: Remove the factory hard tank from the boat and retain in a convenient storage location.
- Step 6: Insert pre-assembled fill and vent hose extensions into the factory fill and vent hoses and secure with the provided hose clamps.
- Step 7: Attach the pre-assembled drain pump adapter to the factory drain pump.
- Step 8: Secure all Quick Release connectors on the ends of the fill hose extension, vent hose extension and drain pump adapter to their appropriate connections on
ATTENTION: This factory ballast upgrade kit is sold individually. We sell systems individually so that customers can upgrade just one side of the boat for surfing if they would like. You will need to purchase two systems if you want additional ballast on both sides of the boat for wakeboarding or surfing regular and goofy. Contact us if you have any questions or need help determining the correct upgrade for your application.
Warranty 1 Year Manufacturer WakeMAKERS - view brand page Manufacturer Part # 42601 Item # 42601
Write a Review And Enter to Win $50*
Excellent fit, great quality, fast shipping
I have a Centurion Avalanche C4 2007. My stock ballast was 209 lbs left and right side. I bought a ballast system update of 1100 lbs with Fly high.
There is no comparison between my stock ballast and the new one. The wave is HUGE and it makes a big difference to surf.
Very good product and great quality.
YOU have to change your factory ballast for a bigger one.... !!
The kits is very easy to instal and it has everything you need.
Great product-purchased the 1100# upgrade for both sides on a 2007 Centurion Avalanche.
super cool system, hard tanks just did not do it the extra weight made all the difference. now i have hard tanks for sale. do it, you will not be disappointed.
Great product easy install
I purchased with the 1100# and oh wow, what a difference this makes over the factory ballast SO WORTH IT!!!
Had everything I needed to set up the sac
Ordered 2 of the 1,100lb TankBuster kits for my 2008 Centurion Enzo 240. The kit included everything I needed to set it up completely and it only took a few hours to remove the hard tanks and install the new lines. Great value for the money.
Product QuestionsNo questions yet. Be the first to ask the question!