You're currently on:

Tigé PiggyBack Rear Factory Ballast Upgrade (2010-2012)

Tige' PiggyBack Factory Ballast System Upgrade

  • Tige' PiggyBack Factory Ballast System Upgrade

* Required Fields


Availability: In stock


Didn't order your Tige with Pro or Surf Ballast? Add an additional 400 lbs. to 1,100lbs. of ballast to your Tige wakeboard boat's factory Base ballast system with our exclusive WakeMAKERS Tigé PiggyBack Wakesurf Ballast System. Models with tanks below the floor.


Interested in adding the rear component of the Tigé Wake Surf Ballast Package or Tigé Pro-Level Ballast Package to your boat for surfing, but don't want to hassle with filling ballast bags by throwing a pump over the side of the boat? Our exclusive Tigé Pigyback ballast upgrade allows you to add an additional 400, 750 or 1,100 pounds of fully automated ballast to the factory Base Package system on your Tigé wakeboard boat.

WakeMAKERS PiggyBack Packages are designed to integrate with your factory ballast system, and are controlled using the switches on your dash or the new TigéTouch to keep it completely automated and effortless to use.

Better wake for your Tige wakeboard boat Small Cost, Huge Payoff Our Tigé Piggyback systems are designed to be affordable to buy, simple to install, easy to use, but have a huge impact on the size and quality of the wake. This picture shows what a single 400 pound Piggyback system installed in a 2010 Tigé RZ2 will look like... who wouldn't want a wake like that? Superb for wakeboarding, and even more impressive for surfing, this is without a doubt the easiest way to completely transform your boat's wake.

Be on the water sooner Less Time Waiting, More Time Riding No one wants to sit around filling and draining ballast bags all day, which is why our Piggyback system integrate with the factory ballast system in your boat, so everything is completely automated. Actual times will depend on the bag size you select, but even the largest option we offer will completely fill or drain in less than 15 minutes, and all without you leaving the driver's seat.

Quick Connect Fittings For Easy Removal Think Quick For Easy Removal We include our exclusive Flow-Rite quick connect fittings system with every factory ballast upgrade we offer, so you can remove the bag in seconds whenever you want. Thanks to the unique, water-tight, two part connector it's easy to pull a bag out for cleaning, storage or winterization. And when you're ready to go ride just drop it back in place and re-attach the dedicated connections.

Wakeboard ballast upgrades designed specifically for Tige' Boats One Size Does Not Fit All Every boat manufacturer does things differently, which is why our factory ballast upgrades are designed to work specifically with a single brand. That means installation is a breeze, and everything will functional exactly like you expect.

How It Works

The Tigé PiggyBack Ballast System is designed to make use of the existing pumps, hoses and switches in your Tigé boat, to expand the capacity of your factory rear ballast tanks from 250lbs. up to an incredible 1,000 lbs. This kit includes everything needed for the installation, including a replacement Fly High Pro X Series ballast big (choose your capacity), Fly High quick connect fittings, all necessary fittings and adapters, hose and installation guide.

As the name implies, this ballast system add-on is connected inline with the overflow of the factory ballast tank, allowing it to PiggyBack on the factory system. In the factory configuration when the in-floor hard tank is full excess water is dumped overboard through the vent hose. With the PiggyBack system installed, excess water from the hard tank flows into the Fly High ballast bag, allowing it to fill after the factory tank is full. Once the new bag is full (which means the factory tank is full), excess water will flow out of the overflow of the bag, and through the factory thru-hull connector, allowing the system to function exactly the same as the stock ballast setup, but with the additional capacity of the auxiliary ballast bag.

Draining is exactly the opposite; as the factory drain pump removes water from the tank, gravity forces water out of the Fly High bag and into the hard tank until both ballast bag and tank are both empty.


Installation requires a few simple and completely reversible changes be made to the plumbing of the stock ballast system in order to connect the Piggyback kit. The one time process typically takes less than 45 minutes. Once installed, you never need to hassle with ballast bags and pumps again. Completely control the system with the factory controls on the dash. Forget about getting up to adjust valves that control the flow, or any manual involvement at all. Just hit the switch and the system will fill and drain exactly as the factory Tige ballast system currently does.

Bag WeightApplicationBag Size
No BagChoose this option if you already have a Fly High Pro X Series ballast bagNo Bag
400 lbsSuitable for use in all Tigé v-drive boats with factory rear ballast tanks installed below the floor.42" x 16" x 16"
750 lbsSuitable for use in 2008-current Tige RZ2, RZ4, 24ve50" x 20" x 20"
1,100lbsSuitable for use in 2006-current Tige 24ve50" x 24" x 24"

This Piggyback system is designed to work with any Tigé boat that has factory rear ballast tanks that are installed below the floor of the boat and use aerator pumps for filling and draining. Confirmed models include the following boats:

- 2010--2012 Tige RZ2 - 2010--2012 Tige RZ4 For specific questions on fitment, and for possible compatibility with other models, please contact us.


No Reviews
Be the first to Write a Review »
1 Year
WakeMAKERS - view brand page
Manufacturer Part #
Item #
Write a Review and Enter to Win $50*

You must be logged in to submit product reviews. If you already have a customer account log in otherwise you will need to Create an Account.

Facebook Logo Twitter Logo Instragram Logo YouTube Logo
Every product review you submit that is approved by our team will enter you to win a $50 gift certificate that we draw monthly. Your entries never expire, and there is no limit to the number of times you can enter.