What it is: Mastercraft Tankbuster Factory Rear Ballast Upgrade The WakeMAKERS Mastercraft TankBuster Wakeboard Ballast System is designed to integrate with your factory ballast system easily, be controlled using the switches on your dash, and not require any additional effort to fill and drain. It's a must have if your summer days on the lake are spent wakesurfing. Are you tired of throwing pumps over the side of your boat? Then the Mastercraft TankBuster factory ballast system upgrade is your solution. Replace the factory hard tanks with our Mastercraft wakeboard ballast system to create a massive wakesurfing or wakeboarding wake. Maximize the ballast capacity in each rear corner, while at the same time restoring full use of the lockers for storage when you don't need the biggest wake possible.
For Use In: This TankBuster system is designed to work with any Mastercraft v-drive wakeboard boat that has hard ballast tanks that installed above the floor in the rear lockers and uses reversible Jabsco Ballast Puppy Pumps. That includes, but is not limited to, the following models:
- '02 Mastercraft X-Star
- '03-'05 Mastercraft X2
- '06-current Mastercraft X1
- '03-'05 Mastercraft X15
- '03-'05 Mastercraft X30
For specific questions on fitment, and for possible compatibility with other models, please contact us.
Bag Size and Dimensions:
- 400lbs - 42" x 16" x 16"
- 455lbs - 32" x 18" x 20"
- 565lbs - 42" x 19" x 19"
- 750lbs - 50" x 20" x 20"
- 1,100 - 50" x 24" x 24"
Buy the Mastercraft TankBuster Ballast Upgrade » |
Post Comments
0 Item(s)