You're currently on:

Thru-Hull Intake Hardware

20 Item(s)

List  Grid 

Set Descending Direction

3M 4000 Marine Adhesive

$14.99
3M 4000 Marine Adhesive creates a water-tight seal when installing thru-hull fittings below or above the water, creates a non-corrosive connection that is semi-permanent.
Item #:
37003

Attwood Clear Silicone Marine Adhesive

$13.99
Silicone Marine Adhesive bonds to all common boat materials, making it perfect for installation of thru-hull fittings.
Item #:
37002

WakeMAKERS Thru-Hull Location Pinpoint Magnets (Pair)

$4.99
The WakeMAKERS location magnets are perfect for pinpointing the exact spot where the you need to drill into your hull.
Item #:
37036

Bronze Mushroom Thru-Hull Intake

$15.99
This bronze thru-hull water intake fitting is the foundation for an automated wakeboard ballast system.
Item #:
35001

Bronze Ball Valve

$19.99
Bronze ball valve available in 3/4", 1", 1-1/4" and 1-1/2" sizes to accommodate any ballast system.
Item #:
35003

Thru-hull Hole Saw Bits

$16.99
Make your next ballast installation project a breeze with these perfectly sized hole-saw bits.
Item #:
37031

Bronze Street Elbow

$17.99
Useful in tight installation locations where clearance in the bilge compartment prohibits the installation of an aerator pump or hose connection directly to the thru-hull and ball valve.
Item #:
35002

3/4" Nipple Fitting

$6.49
Install your ballast pumps without drilling any new holes using the factory thru-hull drain fitting.
Item #:
35006

Flush Mount Thru-hull Drain Fitting

$12.99
Flush mount garboard style fitting for use in a variety of applications
Item #:
35013

Mushroom Thru-Hull Intake Screen

$19.99
Round, brass mushroom intake screens are designed to filter or strain the water flowing into the ballast intake through the hull of the boat. These intake grates will fit all bronze Marine Hardware thru-hulls that are used below the water line.
Item #:
35012

Threaded Hose Barb Connector

$1.99
Connect ballast hose to a female threaded connector for a secure and watertight connection.
Item #:
32012

1" Thread x 3/4" Hose Barb Elbow

$2.49
Adapter converts 1" NPT thread to 3/4" hose barb for connecting ballast hose to intake manifolds.
Item #:
32026

1" Thread x 1" Hose Barb Elbow

$2.49
Adapter converts 1" NPT thread to 1" hose barb for connecting ballast hose to intake manifolds.
Item #:
32020

Intake Nipple Fitting

$2.49
Build a simple manifold to feed all of your ballast pumps with these 3/4", 1", 1-1/4" or 1-1/2" threaded nipple fittings.
Item #:
35004

Intake Tee Fitting

$7.95
Share a single intake to feed multiple pumps in your wakeboard ballast system.
Item #:
35005

1" Thread x 3/4" Thread Reducer

$4.99
Reducing bushing to connect Attwood's 800GPH Tsunami wakeboard ballast pump to larger diameter high capacity thru-hull intakes.
Item #:
35007

1 1/4" Thread x 3/4" Thread Reducer

$4.39
Reducing bushing to connect Attwood's 800GPH Tsunami wakeboard ballast pump to larger diameter high capacity thru-hull intakes.
Item #:
35008

1 1/4" Thread x 1" Thread Reducer

$4.39
Reducing bushing to connect 1" fittings, such as for Jabsco's Ballast Puppy wakeboard ballast pump to larger diameter high capacity thru-hull intakes.
Item #:
35009

1 1/2" Thread x 3/4" Thread Reducer

$5.79
Reducing bushing to connect Attwood's 800GPH Tsunami wakeboard ballast pump to larger diameter high capacity thru-hull intakes.
Item #:
35010

1 1/2" Thread x 1" Thread Reducer

$5.79
Reducing bushing to connect 1" fittings, such as for Jabsco's Ballast Puppy wakeboard ballast pump to larger diameter high capacity thru-hull intakes.
Item #:
35011

20 Item(s)

List  Grid 

Set Descending Direction
Facebook Logo Twitter Logo Instragram Logo YouTube Logo