WakeMAKERS.com Offers Free ShippingFree Shipping On All Orders Over $99!

You're currently on:

Thru-hull Fitting - Chrome

Thru-hull Fitting - Chrome Angle 1" inch

  • Thru-hull Fitting - Chrome Angle 1" inch
  • Thru-hull Fitting - Chrome Angle 3/4" inch
  • Thru-hull Fitting - Chrome Rear 1" inch
  • Thru-hull Fitting - Chrome Rear 3/4" inch
  • Thru-hull Fitting - Chrome Side 1" inch
  • Thru-hull Fitting - Chrome Side 3/4" inch

* Required Fields

$6.99

Availability: In stock

Details

Complete your ballast system installation with this OEM matching chrome thru-hull fitting for 3/4" or 1-1/8" hose.

Description

The TH Marine Brite Plate Chrome Plated plastic 3/4" thru hull fitting goes through a 5 step bonding process and will not chip or scratch. The perfect drain fitting with a shiny OEM stainless steel look. This fitting includes the black nut as shown in the picture.

Suitable for use as a drain or vent fitting for above the waterline use, the extended length barb has plenty of surface area to create a leak proof connection to standard 3/4" or 1-1/8" ballast hose. Perfect for finishing your integrated ballast system, or for upgrading the look of your factory through hull fittings.

This is the same fitting used by Centurion from the factory on their boats.

Highlights

2 Reviews
Read Reviews »
Manufacturer
Seachoice - view brand page
Manufacturer Part #
36005
Item #
36005

Write Your Own Review

Write a review»

You must be logged in to submit product reviews. If you already have a customer account log in otherwise you will need to Create an Account.

Product Reviews

  • 3/19/2012
    Lets see what happens in a couple of years.
    Reese Another product I'm very happy with. I went with the chrome plated plastic over the stainless for the price. I'm hoping in a saltwater environment I won't have to worry about the chrome plating coming off because it's chrome plated plastic. I was able to remove the factory thru-hull fittings and with a little sanding replace with the new fittings. I also installed two new thru-hull fittings with no problems. I think they all match nicely. If I do have to replace a fitting do to corrosion I will buy the same fitting for under six dollars.
  • 4/11/2011
    matches perfect, pain to get tube on
    joe This is 1" interior, so your 1" lines are a pain to get over. Can be done with a heat gun or buy a barrel adapter and a few inches of 1-1/8" line to make it an easier job.
Facebook Logo Twitter Logo Instragram Logo YouTube Logo