Specifications
Model No.: T800
Inlet Length: 1-1/2" L x 3/4"
Inlet Thread Style: 3/4" NPSM
Outlet Style: 3/4" NPSM
The Attwood Tsunami 800 ballast pump is a dependable, long lasting, compact and inexpensive aerator style wakeboard ballast pump. The low price, reliable reputation, and speedy 800GPH capacity makes this wakeboard ballast pump one of our best sellers. And thanks to the cartridge motor design, if the pump does fail, simply intall a new cartridge, and you essentially have a brand new pump. Compared to expensive reversible pumps that need to be completely replaced if they fail, the Attwood Tsunami 800 is a great value.
This pump is a direct replacement for the pumps used on all Malibu wakeboard boats, and the drain pumps used on Centurion, Supra and Moomba wakeboard boats. For flexibility in installation, the long inlet on the pump can be cut to length depending on your particular application offering the ultimate in flexibility. For durability, the housing is made of a rugged glass and mineral filled polymer that will easily withstand a pounding in rough water, and is resistant to chemicals and petroleum.
The Attwood Tsunami 800 Pump will thread directly into any Fly High Ballast Bag. It uses the same thread pattern and is the same 3/4" size making it the best drain pump when plumbing in a integrated ballast system.
You may also be interested in the following product(s)
|

Our Price: $39.95
|

Our Price: $49.95
|
|
|
|
-
So far, so good.
Review by Brian on 1/11/12
I purchased this pump for my automated system I am building. These pumps installed nicely and look great.
As far as wakemakers.com, great customer service, great advice, fast turnaround. I had my order in 2 days and couldn't be happier.
-
great pump
Review by Brady on 7/3/11
great pump but without the adapter, it is great for manually filling my ballast bags
-
Seems plenty fast enough for most applications and easy to plumb
Review by Jeff on 5/11/11
I haven't mounted these in the boat yet but experimented with a 750 lb sac on my porch. To create the most realistic test with all of the restrictions you'd have in an installed system I used 5 ft of the 3/4" standard ballast hose, a 3/4" check valve, a Flow Rite 3/4" elbow and a W736 Flow Rite to Fly High adapter.
With the bag's bottom 10" above the pump (Submerged in a 5 gallon bucket fed by garden hose) and the hose routed up to a height of 30" before going back down to the bag it filled the 750 drum tight in right at 11 minutes. If I get the same result when they're plumbed in the boat I will be happy with that and will have saved $150-200 over the faster options (More expensive pumps, hose, fittings, etc) that would really only be 2-3 minutes faster.
-
Great Little Pump
Review by Todd on 4/27/11
Good all around pump for 3/4" filling.
-
Easy installation and good performance
Review by Ed on 4/14/11
Super easy pumps to install with the 3/4" fittings. Also came with the added bonus of the elbow fittings to give extra installation options. Overall great value............
-
Excellent for small fitting space
Review by Pascal on 9/21/10
I had to add 2 pumps close to the existing one near the engine. Thoses pumps were perfect for this application. They use 3/4" hose and fittings on both sides, so it was easy to fit them to the existing scupper with a 3/4'' manifold.
-
Great Value and Performance
Review by James on 9/20/10
I originally bought the two 500GPH pumps from Walmart since they were $10 cheaper each, however they took awhile to fill my Fly High Tube Sac. So I decided to buy the 800GPH pumps since they are faster, I should have just spent the extra $20 in the first place.. These pumps definitely made a difference and the filling and emptying was a lot better. Another advantage to these 800GPH pumps is that they use 3/4" hose and fittings were as the 1200GPH pumps use 1 1/8" hose and fitting. The 3/4" hose and fitting are fine for any ballast bag and they are cheaper then the 1 1/8' hose and fittings. Using 3/4" will save you money over all when installing a ballast system into your boat.
Save $5 On Your Next Order!
We pay
YOU $5 when you review products on our website. Just submit your review, and as soon as it's approved we'll send you a coupon code you can use to save $5 on the next purchase you make.
When writing your review please try to provide detail about the specific things you like and don't like about the product. Simply saying "this is a really cool product" or "this product sucks" doesn't offer much input, instead think about WHY you feel that way, and back it up with specific examples. That will make your review more useful for other shoppers, which is the whole point. All feedback is subject to verification, and reviews that are too short, obviously made up, or inappropriate will not be approved.